|
|
 |
|
Build stronger, better-fitting cabinets with less work, using Marc Sommerfeld's Fail-safe Cabinetmaking System and this bit set.
Marc has redesigned every bit in this set with the following improvements and upgrades.
All 6 bits are perfectly matched in height.
The stile and rail cutters engagement of the tongue and groove was made deeper to 1/2".
A. This makes joints stronger and now it matches the engagement of the shaper cutters.
B. Makes figuring door part sizes easier.
The drawer front bit is made much larger in diameter for a deeper cut, plus we added the roundover at the bottom to give it an ogee look. Now your drawer front matches the door front edge detail.
The door edge bit was also made larger, plus shallower to allow for ease of mounting 35mm European hinges.
The matching flush trim bit has a shear angle to produce superior cuts.
The raised panel cutter is the largest diameter in the industry at 3 1/2". It includes a back cutter, which allows machining of the front and back of the panel in the same pass, giving you exactly the thickness you need for the panel to fit exactly in the stile and rails. An additional 1 1/4" diameter bearing is included to allow you to make two separate passes when doing arched raised panel work.
Machines materials from 3/4" to 7/8" thick.
Available in Cove or Ogee profile.
6-Pc. Cabinetrmaking Bits
01001 1/2" Shank Panel Cutter
01015 1/2" Shank Ogee Raised Panel Cutter w/Back Cutter
01002 1/2" Shank Flush Trim Bit
01003 1/2" Shank Ogee Drawer Bit
01004 1/2" Shank Ogee Door Bit
02001 1/2" Shank Rail & Stile Pattern/Cope
Bearings 688ZZ & HC318DZZ & R4AZZ & R3ZZ & 608ZZ
|
|
