| 12002
|
 |
| 12-Pc. Introductory Set |
Adds Dovetailing, V-grooving, flush trimming and three sizes of straight bits to our Starter Set above for loads of extra work-saving convenience.
|
| In Stock |
|
|
|
|
|
|
|
|
|
|
| 02001
|
 |
| Raised Panel Rail & Style Bit Set |
The stile and rail cutters engagement of the tongue and groove was made deeper to 1/2".
A. Makes joints stronger and now it matches the engagement to the shaper cutters.
B. Makes figuring door part sizes easier. (1/2" + 1/2"=1") |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| 02002
|
 |
| Shaker Pattern/Cope Cutters |
The stile and rail cutters cut a perfect 7/32" slot which creates a perfect fit for today's 1/4" undersized plywood-no more loose-fitting panels.
Stile and rail cutters have a 7/16" engagement. |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| 02003
|
 |
| Tongue & Groove Cutters |
The big key the both the Tongue & Groove bits are a perfectly-matched pair in height. This allows repected changing out of bits if necessary without adjust the router. Note: use Sommerfeld's rubber grommet in doing this. |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| 02004
|
 |
| 22-1/2* Lock Miter Set 1 15/32OD,22.5CA,7/8CL,3/4TH,1/2SH |
Octagonal shapes are very popular for kitchen corner cabinets, entertainment centers, kitchen islands and corner hutches, but the joints used to be difficult to cut and a nightmare to clamp. Now, Sommerfeld's new 22.5* Lock Miter Set provides a fast, accurate way to build a strong, tight 45* joint. Better still, the lock miter design makes it easy to clamp! |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| 02005
|
 |
| V-Tongue & Groove Bit Set 1 3/4OD,3/4-7/8TH,1/2SH |
This Unique set from Sommerfeld's produces beautiful tongue and groove paneling or flooring with an attractive 45* V-pattern. The difference between this set and other sets is that both our bits have bearings to help guide the workpiece accurately. Our bits are carefully matched, so it's easy to change bits to make the male and female cuts. For fast production on large stocks, set up two router tables with one dedicated to each cutting operation. |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| 02006
|
 |
|
|
| 02007
|
 |
| Glass Panel Rail & Style Bit Set |
The rail & stile cutters leave you with a square rabbet on the inside of your door frame for installing the glass.
The pattern cutting bit has a unique feature with it's two bearings: the bearing in the middle of the 2 cutters gives you a guide while cutting with the grain. The bearing at the top is for use with templates to make arched glass panels. |
| In Stock |
|
|
|
|
|
|
|
|
|
|
